Memorex MPH4385 manual Reset Switch

POWER SOURCES

AC Power Adapter

To operate the unit using AC power, connect the AC adapter to the jack labelled “DC 6V” on the unit and to a wall outlet having 120V, 60Hz only.

CAUTION: Use only the AC adapter provided with

the unit. Using another AC adapter may damage the unit. When not using AC power, disconnect the

AC adapter from the wall outlet by pulling the plugAC Outlet (not the cord). Do not touch the AC adapter with

wet hands.

AC Adapter's Plug

Battery Installation

To use this unit with batteries, or to protect the memory if there is a power failure, insert 4 “AA” size batteries (not included). To install the batteries, open the battery compartment with a slotted screwdriver as shown

in the figure, insert the batteries following the diagram and replace battery compartment cover.

MPH-4385 (REVISED2/01).O/M.QXD

6/20/01 7:41 AM Page 6

Replace the batteries
when	the+Battery
indicator lights in the
display.	––	–
	+	–
RESET SWITCH:

The RESET switch is located at the bottom of the unit. If the telephone locks up or does not work properly, it must be reset, but the call and program memory will be lost.

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1.Use only the size and type of batteries specified.

2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

3.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

4.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

E–5