CONNECTING THE UNIT TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS (FOR DVD AND VCR)
CONNECTING THE UNIT TO A TV USING THE
If your TV has separate AUDIO IN jacks for Composite Video and S- Video Inputs, connect to these jacks.
If your TV has one set of AUDIO IN jacks for Composite Video and S- Video Inputs, connect to these jacks.
NOTES:
• If your TV has a Component input, connect the player with the Component cable as described on the following page for best results.
• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
• When connecting, refer to the owner’s manual of the TV, as well as this manual.
• When connecting, make sure the power is off and both units are unplugged before making any connections.
• If your TV only has one audio input, the use of a “Y” connector may be necessary. Visit your local electronics supply store.
• Set the VIDEO OUT Option (on the GENERAL Menu Page) to
• The connections on this page can only be used for DVD Playback, not for VCR playback.
• If using a TV with a blue screen option, turn the option off on the TV for best results.
• Connect a cable, etc. signal as described on pages 13 and 14 to use the tuner capabilities of this unit.
• The
10
