TO START PLAYBACK
If the unit is in DVD mode, press the DVD/VCR button (on the main unit) or VCR Button (on the remote) to change the unit to VCR mode.
Press the POWER button to turn on the unit and load a prerecorded tape. (When loading a tape with the Erase Prevention Tab intact, playback will begin automatically.)
TO STOP PLAYBACK
Press the STOP button, the tape will stop, but remain fully loaded and ready■ to play.
TO SELECT THE EXTERNAL INPUT
If playback does not begin automatically, press the
PLAY/PAUSE button to begin playback. The unit will automatically adjust®P the tracking to obtain the best possible picture.
NOTE: If you are in VCR mode, when playback reaches the end of the tape, it will stop. Then the tape will be rewound automatically to the beginning and the unit will turn off (to the Standby mode) automatically.
COUNTER RESET
Press the AV1/AV2 button to cycle between the inputs (AV1 (rear A/V jacks), AV2 (from A/V jacks) or the Antenna/Cable TV.
During playing of a cassette tape, press the COUNTER RESET/CLEAR button once to reset the counter to 0:00:00.
34
