13
CONNECTIONS
NOTES:
• Set the TV’s TV/VIDEO button or switch to the VIDEO setting when connecting using the A/V jacks.
• When connecting, refer to the owner’s manual of the TV, as well as this manual.
•When connecting, make sure the power is off and both units are unplugged before making any connections.
• If your TV only has one audio input, the use of a “Y” connector may be necessary. Visit your local electronics supply store.
• If using a TV with a blue screen option, turn the option off, on the TV for best results.
NOTES:
• The signal will be sent to the TV regardless if the unit is on or off.
• You can use the VCR's tuner to change channels, or you can use your TV’s tuner.
• When connecting, refer to the owner’s manual of the TV, as well as this manual.
•When connecting, make sure the power is off and both units are unplugged before making any connections.
• Connect a cable, etc. signal as described above to use the tuner capabilities of this unit.
•The VCR/DVD output will be on CH 3 or CH 4 if you are using the RF Output, please refer to page 32 for setting the
output channel; then, use the TV selector to select CH 3 or CH 4 for the VCR/DVD Output.
CONNECTING THE UNIT TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS
CONNECTING THE UNIT TO A TV USING THE RF INPUT/OUTPUT JACKS
(See the following page for specific antenna connections)