BATTERY INSTALLATION
1.Open the Battery Compartment cover by pushing in on the tab and lifting it out.
2.Install two (2) “AA” batteries (not included), paying attention to the polarity diagram in the Battery Compartment.
3.Replace the Battery Compartment cover.
| + – | + |
| – | |
|
| BATTERY PRECAUTIONS |
Follow these precautions when using batteries in this device: | ||
1. | Use only the size and type of batteries specified. | |
2. | Be sure to follow the correct polarity when installing the batteries as indicated in the Battery Compartment. Reversed | |
3. | batteries may cause damage to the device. | |
Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and | ||
4. | fresh ones. |
|
If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from | ||
5. | possible battery leakage. |
|
Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery | ||
| manufacturer’s directions.) |
|
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER
45 | 45 | 20ft |
|
NOTES:
• When there is an obstacle between the unit and the transmitter, the transmitter may not operate.
• When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the REMOTE SENSOR of the unit, the remote operation may be unstable.
9
