V. Getting Started:
Check your Operating System (OS):
•For Windows® Me, Windows® 2000 & Windows® XP
There is no need to install any software or drivers! Go straight to section VII. Using Your TravelDrive™ below and follow the instructions to begin using your TravelDrive™.
•For Windows® 98SE
You will need to install a driver for the computer to recognize the TravelDrive™. See section VI. Windows® 98SE Driver Installation below.
•For Windows® NT
NT does not support USB. The TravelDrive™ is not supported in this OS.
•For Windows® 98 or older
Windows® operating systems prior to Windows® 98SE do not have adequate USB support, and therefore the TravelDrive™ is not supported with those operating systems. TravelDrives are not useable in PC's running Windows 98 or older operating systems.
VI. Windows® 98SE Driver Installation:
(Internet
Access
Required)
If your computer uses Windows® 98 SE as its operating system, you must install a driver for your Memorex® TravelDrive™. The driver required is available for down- load if you have Internet access. The required file is titled "USB TravelDrive™ Version C Driver" and is located on the Memorex website at www.memorex.com/service_support/software.php. Follow the steps below to download and install the Version C driver:
NOTE: Do not insert your TravelDrive™ into your USB port until steps 1 through 12 below have been completed successfully.
1.Turn on your computer and wait for the Windows® desktop to appear.
2.Close any applications you may have running.
3.Download the necessary driver by launching your Internet browser and insert the following web address located on the Memorex website: www.memorex.com/service_support/software.php.
•Select SOFTWARE DOWNLOADS, then USB TRAVELDRIVES.
•Click on DOWNLOAD under TravelDrive Driver C. Read the license agreement and if you agree to the terms, click on I AGREE AND WISH TO PROCEED WITH THE DOWNLOAD.
•When the download dialogue box appears, click on SAVE.
