Customising 562 using Config | 20 |
|
|
2.Use the and , Volume keys to choose between:
∙VolM. Volume main means that the volume control in the DACV option (above) will follow the main system and respond to the red keys on the remote. Shifted (secondary) volume commands will be passed on to another product.
∙VolS. Volume secondary means that the volume control in the DACV option (above) will follow the second volume control in the system and respond to the shifted volume command on the remote. An example of an application of this would be where 562 is not the controller – as for example in a D5000 system – and you want to change the 562 variable output from the remote control.
For further details on shifted commands see the manual supplied with the remote control.
If you do not have a DAC fitted this setting is ignored. If in doubt choose VolM.
Setting the Menu mode for 562
In Config mode:
1.Press Copy until you see a display like:
N
In the 500 comms system there is provision for the menu key (remote control) instructions to be passed on by the controller, either because it does not use menus, or because a shifted menu command has been created.
N means that menu instructions received from a controller (like a D5000) will be ignored.
For further details on shifted commands see the manual supplied with the remote control.
2.Use the and , Volume keys to choose between:
∙ 1. Shifted menu instructions ( in this case only and ) will be used to adjust the balance.
∙ 2. Shifted menu instructions ( in this case only and ) will be used to adjust the balance.
Setting a Video version
In Config mode:
1.Press Copy until you see a display like:
562
2.Use the and , Volume keys to choose between 562 and 562V. If your 562 has a video board fitted, always chose 562V.
200-Series mode CD player?
In Config mode:
1.Press Copy until you see a display like:
CD?N
2.Use the and , Volume keys to choose between CD?Y and CD?N.
a.is there a Meridian CD player?
b.is the network operating in 200 mode?
c.is 562 the system controller?
If the answer to a, b and c is yes, choose CD?Y otherwise pick CD?N.
562 User Guide