Meridian America Setting up sources, Choosing source logos, Customising 562 using Config

Customising 562 using Config 21

Setting up sources

For each of the twelve source selection keys on the Remote control you choose a display Logo and a primary physical input connection – and by implication – signal type. In addition for digital sources you may set up a secondary analogue input connection that 562 may use for the analogue tape copy signal. (This is necessary if you do not have the DAC option fitted or externally connected – see page ??).

Normally as shown we set the CD key to give a CD display with the D1 (Digital 1) input selected. You may however wish to display CD1 for your main CD player and to connect it to D2 or one of the analogue inputs.

A full list of possible logos and their meanings is:

Source	Logo	Source	Logo	Source	Logo
CD	CD	S-VHS	SV	DAB	DB
Radio	RD	Betamax	βm	Dig. Sat.	DS
LP	LP	Camera	Ca	ADC	AD
Tape 1	T1	Video 8	V8	R-Reel	RR
Tape 2	T2	CD-Video	CV	FM tuner	FM
CDR	Cr	CD-I	CI	AM tuner	AM
Cable	Cb	CD trans.	C1	MW tuner	MW
Teletext	TX	Photo CD	PC	SW tuner	SW
VCR 1	V1	CD Lib.	CL	LW tuner	LW
VCR 2	V2	Jukebox	JB	Line	Li
Laserdisc	LD	CD-ROM	Rm	Mic.	Mi
Satellite	SA	DAT	DT	Aux	Au
CDX	C2	DCC	DC	Mixer	Mx
78 rpm	78	Phono	Ph	Simul.	SB
VHS	VH	MiniDisc	VH	Computer	PC

Choosing source logos

Note at any time in the source configuring process you can use the handset Mute key to return to the root menu with a display like ‘500’ or ‘200’.

In Config mode:

1.Press Source until you see a Remote-key (source) + logo display like

CD CD

2.Press Source until the Remote key name for the source you wish to configure is displayed.

3.Use the and Volume keys until the correct logo is indicated – see the list above.

4.Make changes for all the source options.

562 User Guide