Gateway GT704 user manual Setting Up Static IP, on the Computer, Windows 98 SE

Setting Up Static IP	b
on the Computer

To communicate with the Gateway from a computer on the network (to use the Web Configuration Utility, for example), the user may have to switch the IP address settings from DHCP-enabled to static IP, so that the computer and the Gateway are on the same network subnet.

To set up static IP on a computer, select the operating system and follow the instructions.

☞Note: The following procedures are based on the Gateway’s factory default IP address. If the Gateway’s IP address has been changed, enter the new IP address when instructed to enter an IP address.

Windows 98 SE

1.From the desktop, click on the Start button in the lower left corner.

2.From the menu that appears, select Settings.

83