LAN IP Address, Dhcp Server | Gateway GT704 specs

Actiontec USB/Ethernet DSL Gateway User Manual

LAN IP Address

Selecting LAN IP Address in the “Configuring the Advanced Settings” screen gen- erates the “LAN IP Address” screen.

The values in the “Device IP Address” and “Device LAN Netmask” text boxes are the IP address and Subnet mask of the Gateway as seen on the network. These values can be modified for your LAN network, but Actiontec recommends keeping the default factory settings (IP address 192.168.0.1 Subnet mask 255.255.255.0).

☞Note: If the Gateway’s LAN IP Address is modified, ensure the DHCP Server range is within the same subnet. For more infor- mation, see “DHCP Server Configuration.”

After changing settings, click Next or Back to continue, or Save and Restart to make all changes permanent.

DHCP Server

Selecting DHCP Server in the “Configuring the Advanced Settings” screen gener- ates the “DHCP Server” screen. The Gateway has a built-in DHCP (Dynamic Host Configuration Protocol) server that automatically assigns a different IP address to each computer on the network, eliminating IP address conflicts.

The factory default setting is On. To disable the DHCP Server, select Off.

40

Image 43

Gateway GT704 user manual LAN IP Address, Dhcp Server

Contents

DSL Gateway Table of Contents Setting Up Static IP on the Computer Using UtilitiesSetting Up a Network Troubleshooting Introduction1 Package Contents Minimum System Requirements Features Introduction Getting to Know the Gateway Power LightDSL Light Phone Port Internet LightEthernet Lights USB Light USB Port Reset SwitchPower Port Power Switch Connecting a Computer to the Gateway Setting Up GatewayPage Setting Up the Gateway Page Setting Up the Gateway Page Setting Up the Gateway Page Setting Up the Gateway Page Setting Up the Gateway Page Setting Up the Gateway Page Setting Up the Gateway Installing Phone Filters Setting Up the Gateway Page Setting Up the Gateway Setting Up the DSL Connection Setting Up the Gateway Page Setting Up the Gateway Page Basic Setup Performing a Basic SetupPage Changing the Admin User Name and Password Click Save and Restart at the bottom of the screen Accessing Advanced Setup Using Advanced SetupTo access the Web Configurator’s Advanced Setup screens WAN IP Address Obtain an IP Address through PPPoE or PPPoA Transparent BridgingBroadband Connection via PPPoE screen PPP Auto Connect on PPP Auto ConnectEncapsulation PPPoA only Specify a Static IP Address Dhcp Server LAN IP Address Ending IP Address Beginning IP Address DNS Dynamic or Static Services BlockingLease Time Domain Name Website Blocking Remote Management Application Layer Gateway and Port Forwarding DMZ Hosting High Firewall Low Medium Dynamic Routing Static Routing NAT Network Address Translation Time Zone UPnP Universal Plug and Play Remote Syslog Capture General Status Viewing Gateway’s StatusPage ARP Table Routing Table WAN Status Active User List LAN Status This page left intentionally blank Web Activity Log Using Utilities System Log DSL Settings Upgrade Firmware Restore Default Settings Ethernet Setting Up a NetworkPage Setting Up a Network Page Setting Up a Network USB Setting Up a Network Page Setting Up a Network Page Physical Connections TroubleshootingTroubleshooting Cannot Use the Internet Which connection speeds does the Gateway support? Frequently Asked QuestionsConnection to the Internet Which protocols does the Gateway support? Will my Xbox work with the Gateway? Is the Gateway flash-upgradeable? How do I do it?What is the valid IP range I can use for my home network? How do I find out which IP address my computer is using? Yes, if the application is designed to run over a network Does the Gateway function as a firewall? What is the default username for the Gateway?What is NAT and how does it protect my network? How many computers can be connected through the Gateway? This page left intentionally blank Locating Computer Information Reference Locating Windows Operating System Files Appendix a Reference Click Search Windows 98 SE Setting Up Static IP On the ComputerPage 192.168.0.2 Enter the following address in the Subnet mask text box Windows Me Appendix b Setting Up Static IP on the Computer 192.168.0.2 Windows Page Appendix b Setting Up Static IP on the Computer 192.168.0.2 Windows XP Page Appendix b Setting Up Static IP on the Computer 192.168.0.2 Computer Security Comparing DSL Service with a Dial-Up Modem Computer Security Gateway SecurityInternet Browsers Electronic Security 100 Full-rate Adsl Interface Specifications dGeneral WAN PPP, DHCP, Static IP Power, DSL, Internet, Ethernet 4, USB LED IndicatorsEnvironmental Glossary Access Point 104 Ssid 106 Classic Non-Windowsf System Setup 108 Appendix f Non-Windows Setup 110 Modifications Regulatory Compliance NoticesClass B Equipment All other names are the property of their respective owners Miscellaneous Legal Notices 113 Limited Warranty 114 Limited Warranty 116