Customise 562 using Type | 16 |
|
|
A full customising process
A full customising process will generally involve using all the configuring modes of 562. A full procedure is as follows.
1.Change to Type and select the configuration closest to your requirements.
2.Change to Config and make choices about:
∙keys, displays, inputs.
∙control options
3.Change to Gain and make choices about:
∙analogue input sensitivity.
4.Change back to Normal.
Making changes to an existing setup
Config and Gain are configuration editing modes, they do not reset on entry. Type however performs a full reset of all parameters.
To make any changes to your custom configuration:
1.Change to Config or Gain – whichever is appropriate,
2.make the changes you want,
3.change back to Normal.
Customising using Type
For an overview of Type, see page 13.
Type is a mode used specifically to setup 562 into one of nine factory- preset configurations. Type resets the following for all six Types.
∙Balance to central.
∙Depending on the Type selected, the communications settings will be as follows:
Type | Mode | DAC ? | Sources | CD ? |
|
|
|
|
|
1 | 500 | N | 12 | – |
|
|
|
|
|
2 | 200 | N | 8 | Y |
|
|
|
|
|
3 | 500 | N | 6 | – |
|
|
|
|
|
4 | 500 | N | 8 | – |
|
|
|
|
|
5 | 500 | V 1 | 12 | – |
6 | 500 | V 1 | 8 | – |
7 | 500 | T 1 | 12 | – |
8 | 500 | T 1 | 8 | – |
9 | 200 | N | 8 | N |
|
|
|
|
|
562 User Guide