Other Information
AV COMPULINK remote control system
When you buy a separate TV, VCR DVD player, receiver or other components and connect them to each other, you have to operate each component individually. JVC’s AV COMPULINK remote control system meets the demand for a system made up of single components and has the ease of operation of a single unit.
7Operation
You can enjoy pictures and/or sound by just putting a source component (which plays back the pictures and/or sound such as a DVD player or VCR) into play mode. You do not have to operate the TV and receiver including power switching.
1.Turn on the main power of the television.
2.Insert a disc into the source component.
3.Press 3 of the source component.
The following actions are performed automatically:
•Turning on the power of the television.
•Setting the source of the television to the external input (VIDEO 1 or VIDEO 2).
•Turning on the power of the receiver.
•Setting the source of the receiver to the component which has just started playback.
7Connection and Setup
Using the AV COMPULINK cable, connect the AV COMPULINK terminals of each component to one another.
To AV COMPULINK (II)
TV
DVD player
If you connect a DVD player with a television via AV COMPULINK, set the DVD player’s AV COMPULINK setting as follows.
•When connecting with VIDEO 1 input terminal of the television: DVD2
•When connecting with VIDEO 2 input terminal of the television: DVD3
To AV COMPULINK (II)
To AV COMPULINK (II)
TV
DVD player | Video cassette recorder |
62
