Meridian Audio manual To connect the G68D or G68ADV to Meridian DSP loudspeakers, DSP5000C

1 4

I n s t a l l i n g t h e

d i g i t a l s u r r o u n d

c o n t r o l l e r

To connect the G68D or G68ADV to Meridian DSP loudspeakers

DSP5000C				G68D/ADV Digital Surround Controller
INPUT						COMMS	DIG OUT
COMMS
OUTPUT
		M5 LEAD
DIGITAL
OUTPUT
1
DIGITAL					511 S-patch box
INPUTS							S5 LEAD
		S5 LEAD (digital unused)
2
	DSP5000 – MAIN R				DSP5000 – MAIN L
DIGITAL INPUTS		DIGITAL	COMMS	DIGITAL INPUTS		DIGITAL	COMMS
2	1	OUTPUT		2	1	OUTPUT
			OUTPUT INPUT				OUTPUT INPUT

S5 LEAD

•Use the Comms part of an M5 lead to connect one of the COMMS sockets on the G68 to the digital speaker you have chosen as the master (typically the centre speaker).

•Use the audio part of the M5 lead to connect the digital speaker to the appropriate digital output socket.

If the system includes more than two Meridian DSP loudspeakers you will need a 511 S-patch box (available separately) to link together the S5 leads from each speaker.

•Connect the COMMS output from the master digital speaker to one socket on the 511 using an S5 lead.

•Link each pair of speakers together with an S5 lead, out of the first speaker and into the second speaker, as shown in the diagram for the main L&R.

•Connect the inputs to the first speaker of each additional pair to the 511 (Comms) and the appropriate output of the G68 (audio), using an S5 lead.

The speakers should then be configured appropriately as master and slaves, and Left, Right, Centre, Surround; see Meridian DSP Loudspeaker User Guide for more details.