2 6
C o n f i g u r i n g t h e d i g i t a l s u r r o u n d c o n t r o l l e r
Stage 1: Resetting the product
The digital surround controller provides several alternative standard settings, called Types, which configure all aspects of the product into the most commonly needed configurations.
Choosing one of the Types overrides any other configuration you may have performed, and so can be used to reset the configuration of the unit.
To reset the configuration
• Press Wizard.
The display shows the title screen for stage 1:
Press More for help
1: Reset settings
Back Enter Skip
•Press Enter to proceed or Skip to go stage 2.
If you pressed Enter the display shows:
• Press A or V to step through the available Types.
A description of the speakers for each type is shown on the top line of the display. As you select each Type the digital surround controller is reset to that Type.
When you have selected the Type you want:
Either:
•Press Next to proceed to configuring speakers, as described in the next section.
Or:
• Press On/Off to return to standby.
Reset all settings?
Back Yes
•Press Yes to proceed or Back to exit.
The display shows the current Type:
7.1, All An, Mono/THX Sub
Type 1
Back Next óòô öõú
