2 8
C o n f i g u r i n g t h e d i g i t a l s u r r o u n d c o n t r o l l e r
Stage 2: Configuring speakers
The Speakers configuration stage allows you to set up the digital surround controller for the particular arrangement of loudspeakers in your system.
To configure the speakers
Either:
• Press Next after resetting the product; see page 26.
Or:
•Press Wizard; see page 25.
•Press Skip to skip past the Reset settings menu.
The display shows the title screen for stage 2:
Press More for help
2: Select speakers
Back Enter Skip
• Press Enter to proceed or Skip to go to stage 3.
The display shows the first speaker configuration option:
Number of Subwoofers:
one
Back Next óòô öõú
• Press Next or Back to step between options.
A description of each option is shown on the top line of the display, and its current value is shown below this to the right.
The options are summarised in the table on the next page.
To change an option
•Press A or V to step between the alternative values for the option.
When you have stepped through all the speaker options the display shows:
Speaker choice finished.
Back Next
Either:
•Press Next on the last option of the last speaker to proceed to configuring sources, as described in the next section.
Or:
• Press On/Off to return to standby.
If you press On/Off before completing the configuration a warning is displayed, giving you the option of continuing or abandoning the configuration.
