Meridian Audio G68 manual Standard parameters, D S P p r e s e t s, Parameter, Range, Default

4 4

D S P p r e s e t s

Standard parameters

All DSP presets (except Mono and Direct) provide the following standard parameters.

Individual DSP presets provide additional parameters, to allow you to adjust specific features provided by that preset. For full details refer to information about each preset later in this chapter.

Parameter	Range	Default
Treble*	-10dB to +10dB	+0dB
Bass*	-5dB to +5dB	+0dB
Phase*	+ or -	+
Axis†	-2 to +3	-1
Balance	<10 to 10>	<0>
HS Output?*	Y or N	Y
Centre	-3.0dB to +3.0dB	+0.0dB
Depth	-2.5ms to +5.0ms	+0.0ms
Rear	-30dB to +10dB	+0dB
Sides	-30dB to +10dB	+0dB
R Delay	0ms to 30ms	Varies
S Delay	0ms to 30ms	Varies
LipSync	0ms to 30ms	0ms
RC	As defined	Bypassed

*These parameters apply to all DSP presets.

†Axis is only available with Meridian DSP loudspeakers.

What it changes

The slope of the frequency response.

The bass response.

The phase of all loudspeakers.

The vertical balance.

The L-R balance.

Select Y for high-rate audio, upsampled if necessary. Select N for standard-rate audio, downsampled if necessary.

The level of the centre.

The delay of the centre.

The level of the rears.

The level of the sides.

The delay of the rears.

The delay of the sides.

The sync. delay.

The Room Correction profile, or Bypassed for no room correction.