Speaker size
These tests allow you to determine the bass handling capability of large analogue speakers and subwoofers. Once set, the digital surround controller will limit the bass level to protect the speakers from potential damage.
In each test the display shows the speaker being tested and the level of the test signal, followed by the limit value set for the speaker.
For example:
Press More for help
Left Size 5/28
ìî | ïñ óòô öõú |
•Press > or < to move between each of the speakers under test.
•Press A or V to adjust the limit value for the speaker.
As you increase the limit value, the test signal will gradually get louder up to the limit value. Reducing the limit value will cause the test signal level to drop immediately.
•Adjust the limit value until the speaker is just beginning to produce distortion, indicating that it is reaching its bass handling limit.
This is the last test in the calibration procedure; see To complete the calibration procedure, page 36.
3 9
C a l i b r a t i n g t h e s y s t e m