Meridian Audio G68 manual Settings, Following table summarises the product settings, Option

Settings

The following table summarises the product settings:

3 3

C o n f i g u r i n g t h e d i g i t a l s u r r o u n d c o n t r o l l e r

Option

Tuner region:

The fan is:

Distance measurement:

Do your subs play to 20Hz? Boundary Gain Compensation:

Rear speaker separation

Copy/Zone 2 analogue out:

Zone 3 analogue out:

Timeout to Home buttons: Diagnostic displays:

Is the G68 IR Controller?

Main System Address

Copy System Address

Zone System Address

Product Address

Values

Europe/elsewhere, Japan, USA

used as necessary, never used feet/inches, metres

No, THX Ultra2/yes off, on

<12"/0.3m, 12-48"/0.3-1.2m, >48"/1.2m

fixed, variable

fixed, variable

on, off on, off

Auto, Controller, Not Controller 1-8 1-8 1-8

1-8

Description

Band selection (MW/LW or AM), tuning steps, and FM deemphasis standard. For all countries except the USA or Japan use the Europe setting.

Specifies how the temperature controlled fan operates. Units for displaying and entering distances. Subwoofer frequency response.

Reduces the bass to compensate for listening positions close to a wall.

Separation between rear speakers.

Whether the Copy/Zone 2 analogue output is controlled by the volume control.

Whether the Zone 3 analogue output is controlled by the volume control.

Whether the soft keys revert to the home keys after a delay. Whether diagnostic displays are shown.

Whether the product is the infra-red controller for the system. Advanced setting (normally 1).

Advanced setting (normally 2).

Advanced setting (normally 3).

Advanced setting (normally 1).