Meridian Audio 501V Conf, Cdcd, To configure a source, To change an option, the Control Unit

To configure a source

●Turn off the control unit, using the power switch on the back panel.

●Turn on the power again while holding down the Display key on the front panel.

To change an option

●Press Aor Vto step between the alternative values for the option.

When you have finished programming sources:

The display will show:

Conf

●Switch off at the back panel, and then switch on again to restore normal operation.

●Press Source until the left-hand pair of characters identifies the source you want to configure.

the Control Unit

For example, to configure the CD source the display initially shows:

●Press Copy (front panel), or > and between options.

CDCD

<(remote control), to step

Customising

The right-hand pair of characters shows the current value of the option.

The options are summarised in the table shown opposite.

24