Meridian Audio 501V Specifying information about your system, Auto, SA=1, PA=1, Vout, Conf, Unit

Specifying information about your system

In addition to configuring the sources, and programming their levels, you can configure many other aspects of the operation of the 501/501V Control Unit to suit the way your system is set up, and the way in which you want to use it.

The table below shows the options you can configure.

Option Initial Value

Communications mode (500 or 200)

5OO

Note that any settings that you configure are reset to standard values when you choose one of the standard settings: see Choosing standard settings, page 20.

Controller mode (Auto, Con, or NCon)

Auto

To configure the control unit

System address (1–8)

SA=1

Unit

● Turn off the control unit, using the power switch on the back

panel.

Product address (1–8)

PA=1

Control

● Turn on the power again while holding down the Display key

on the front panel.

Volume control (Vout or Fout)

Vout

Customising the

30

The display will show:	Conf
It will then show the first	5OO
configuration option:

●Press Copy to move between the options.

●Press A or V to change the value of the current option.

Volume mode (VolM or VolS)

Menu mode (N, 1, or 2)

Video version (501 or 501V)

200 Series CD player (N or Y)

VolM

²³N

5O1

CD?N