Meridian Audio 501V manual Before following the steps below, ensure all units are switched off

Setting up the Control Unit

There is interference on the radio and/ or television when the control unit is switched on

Before following the steps below, ensure all units are switched off.

If this equipment does cause or suffer from interference to/from radio or television reception then the following measures should be tried:

❍Reorient the receiving aerial (or antenna) or route the antenna cable of the receiver as far as possible from the 501/501V Control Unit and its cabling.

❍Ensure that the receiver uses well-screened antenna cable.

❍Relocate the receiver with respect to the control unit.

❍Connect the receiver and this product to different AC outlets.

Communication is not working between the 501/501V Control Unit and other Meridian products

❍Check that all products are interconnected using the correct comms leads.

❍If the installation includes 200 Series or 600 Series units, check that all 500 Series units are set to 200 mode.

40