Meridian Audio 501V manual To connect to a 555 Stereo Power Amplifier, Setting up the Control Unit

To connect to a 555 Stereo Power Amplifier

● Turn off the control unit, using the power switch on the back

panel.

● Turn on the power again while holding down the Off key on

501 Control Unit

Main Out

L

R

555 Stereo Power Amplifier

INPUTINPUT

the front panel.

The display will show	Ty 1
the current Type setting:

Setting up the Control Unit

Audio lead

●Connect one pair of the sockets marked Main Out L and R on the rear panel of the 501/501V Control Unit to the INPUT sockets on the rear panel of the 555 Stereo Power Amplifier.

To connect to Meridian 600 or 200 Series equipment

If your system includes any Meridian 600 or 200 Series units, with 600 COMMS or 200 COMMS sockets, you should set all the 500 Series units to 200 COMMS operation using the following procedure:

●Press A or V on the front panel to change the Type setting.

If your system includes a Meridian CD player select Type 2; otherwise select Type 6.

For example, if you select	Ty 2
Type 2 the display will show:

●Switch the power off and on again to restore the control unit to normal operation.

●To return to 500 COMMS operation repeat the above procedure, and select Type 1, 3, 4, or 5. For more information see Choosing standard settings, page 20.

38