
What to do when these messages are displayed
Message | Cause (Contents) |
|
|
1000h
EXIT
When the “Lamp time” reaches 1000 hours
[A message indicating “1000 h” appears on the projected screen.
•Press any key to delete the message.
Lamp replacement
EXIT
Every time the projector is turned on, this message appears on the screen when the accumulated lamp time reaches between 1900 hours to 2000 hours.
[Press any button to delete the message.
Get ready a new
Lamp replacement
WARNING
| The word “Warning” appears and blinks when the accumulated lamp time |
| reaches 2000 hours. |
| The message can be cleared by pressing the EXIT button. However, the |
| same message will appear again every |
| Once the projector is turned off, it does not turn on again if the accumulated |
EXIT | lamp time has exceeded 2000 hours. |
| When the accumulated lamp time reaches 2010 hours, the projector is forci- |
| bly shut off and cannot be turned on again. |
| [ Replace the |
| (☞ page 42, 44) |
Note
The message display language corresponds to the menu language set- ting. This is set to “English” when the projector is bought. The display language can be selected from 8 languages. (☞ page 38)
However, the input mode (PC 1,PC 2, PC 3, Y/C, VIDEO) and button indications (FREEZE, D.ZOOM, EXIT) are only displayed in English ir- respective of the display language setting.
49