1. Setting up
Holes plug
screw
plastic bolts 
wall bracket
Wall mounting
Remove the base (if it is fitted).
•Remove the four caps from the rear side.
•Insert the enclosed plastic bolts in the holes and carefully secure each one with a screw M6x20 mm.
•Hold the wall bracket against the wall at the desired posi- tion and mark the positions of the four mounting holes.
•Screw the wall bracket to the wall with wall plugs and screws.
•Insert the plastic bolts on the TV set into the keyholes of the bracket and push the TV set fully downwards.
•Take care that no bright lights (including sunshine) shine directly on the screen, sin- ce this can cause reflections and reduce the apparent brilliance of the picture.
•The best viewing distance is about five times the diagonal dimension of the screen. For a TV set with a 75 cm screen, it is thus about 3.75 m.
•All cables and components connected between the antenna/broadband socket in the wall and the TV set must comply with European Standard EN
•There may be no magnetic fields in the immediate vicinity of the TV set. External loudspeakers should thus be positioned at a suitable distance from the set.
•The antenna connection cable used for the set should have a screening attenuation of at least 75 dB.
•The use of unapproved cables and components will invalidate the type approval of the TV set.
4
