1. Setting up

The Plasma TV Set consists of the components: plasma monitor, stand, wall mounting bracket, two loudspeakers with bases and the tuner box.

Fitting the base

The stand has two vertical panels at the front and back. The (higher) rear panel, with a slot for the cables, is secured with four screws and must be removed before the plasma TV set is mounted on the stand.

Slide the stand into the guides on the rear of the TV set and secure it carefully with four screws (M5 x 20 mm).

Plug in the power cable and the cable to the tuner box, lay them through the slot in the rear panel and secure the panel to the rear of the stand.

Front panel, fixed

Cable slot

Rear panel, removed

Left loudspeaker

Plasma monitor

 

 

Right loudspeaker

4 screws

 

 

M5 x 12mm

 

 

 

Stand

4 screws

Loudspeaker bracket

 

 

 

M5 x 20mm

55

Page 55
Image 55
Metz 42TM92 operating instructions Setting up, Fitting the base