press “
” or “
” button. To cancel APS dur- ing running press “
” or “
” button.
After APS is finalized, a programme list will apper on the screen. In the programme list you will see the programme numbers and names assigned to the programmes.
If you do not accept the locations and / or the programme names of programmes, you can change them in Programme menu.
Other Features
TV Status
Programme Number, Programme Name (or AV), (they are displayed on the upper left of the screen) and Sleep Timer (shows the time left on the upper right screen if en- abled). In stereo options the sound indicator is displayed with them too. They are dis- played after programme change during 3 seconds.
Programme Number
Programme Name (5 characters)
These OSD’s are displayed when a new programme is entered by digit button, by
pressing “
” button, or by “P+“ or
ton, or by “TV” button.
Programme Swap (
)
This button is used to reenter to the preced- ing entered programme again. Pressing
"
" consecutively allows to swap into two last entered programmes.
Double-digit (- -)
This OSD is displayed when the "Double- Digit" button pressed in place of the pro- gramme number indicator.
After then, in order to enter a programme it must be pressed to two digit consecutively. When it is late to press any digit button this function will be ignored and the display will be erased. In the same way it must not be late to press any digit button after entering
the first digit. The limit of the delay time is 3 seconds.
Personal Preferences (
)
All the preset values will be restored, when
pressing "
".
Sound Indicator
This is a stereo option. The alternatives of the indicator are Mono, Stereo, Dual I and Dual II. This indicator is displayed under the programme number indicator on the screen.
In Mono broadcast or in
In Stereo broadcast.
If dual broadcast detected. Dual I is selected in default and also can be selected after Dual II by Remote Control.
If Dual II selected by Remote Control.
Sleep Timer Last Minute Indicator
It is displayed on the upper right of the screen. If sleep timer is activated it is dis- played with the TV status and erased with it after 3 seconds.
If there is left only one minute of the down counting of the timer, it is displayed auto- matically on the upper left of the screen, and stayed there until finishing. Then TV goes automatically to
Mute Indicator
It is placed in the upper middle of the screen when enabled, and it stays there until it is disabled.
- 16 -
