Copy Facility
Source selection for VCR recording.
•Select Features Menu in the Main Menu.
•Select 
” or “
” button.
Camera and Camcorder
To connect to Front-AV input (FAV):
Connect your camera or camcorder at the front side of your TV.
•Connect your equipment to the TV via VIDEO (yellow), AUDIO R (red) and AUDIO L (white) inputs. You should connect the jacks to the input in the same colour.
Search for and store the test signal of the video recorder
•Unplug the aerial cable from the aerial socket “ANT” of your video recorder.
•Switch on your TV and put the video recorder on the test signal. (See the handbook for your video recorder.)
•Enter the Tuning menu via the Install menu.
•Search for the test signal of your video re- corder in the same way as you searched for and stored the TV signals. See Tuning, Search and Store TV channels. Store the test signal under programme number 0.
•Replace the aerial cable in the aerial socket “ANT” of your video recorder once you have stored the test signal.
Connect the decoder to the video recorder
Some video recorders have a special euroconnector for decoder.
•Connect a eurocable to the euroconnector of your decoder and to the special euroconnector of your video recorder. See also the hand- book of your video recorder.
•To connect your video recorder to the TV, see TV and Video Recorder section.
If you want to connect more equipment to your TV, consult your dealer.
Connecting Headphones
Use the stereo headphone socket (HP) on the lower front / right side of your TV, to con- nect headphones.
Tips
Care of the Screen
Clean the screen with a slightly damp, soft cloth.Do not use abrasive solvents as they may damage the TV screen coating layer
Poor Picture
Have you selected the correct TV system? Is your TV set or house aerial located too close to the loudspeakers,
Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial.
Is the picture or Teletext unrecognisable? Check if you have entered the correct fre- quency.
The picture quality may degrade when two peripherals are connected to the TV at the same time. In such a case, disconnect one of the peripherals.
No Picture
Is the aerial connected properly? Are the plugs connected tightly to the aerial socket? Is the aerial cable damaged? Are suitable plugs used to connect the aerial? If you are in doubt, consult your dealer.
No Picture means that your TV is not receiv- ing any transmission. Have you pressed the correct keys on the remote control? Try once more.
Sound
You can not hear any sound. Did you perhaps interrupt the sound, pressing “ 
”key? Are
external speakers connected to the TV?
- 21 -
