Troubleshooting
SET RARP {Enabled, Disabled} | Enables or disables the sending of RARP |
| queries during the boot sequence. It is |
| enabled by default. |
SET Secondary ip_address | Specifies a backup loadhost. The IP address |
| should be in standard numeric format (no |
| text names are allowed). The backup |
| loadhost will be queried if the primary host |
| cannot load the server. |
SET Software filename | Specifies the name of the file to load. The |
| ETS will automatically add .SYS to the |
| filename you specify. Note that all protocols |
| must have a filename specified (either the |
| default or set by the user). For more |
| information, see D:Updating Software. |
| TCP/IP users must use the Software option |
| to specify the loadhost, the loadfile, and their |
| own network address. |
| TFTP users can specify a complete path |
| name (up to 31 characters) if the file is |
| located in a directory other than the default. |
| The case of the filename must match that of |
| the filename loaded onto the host computer. |
Show Server | Use this command when issuing other |
| commands to view the current ETS setup. |
52 | ETS Installation Guide |
