Lantronix ETS32PR, ETS8PS, ETS16PS, ETS16PR manual Frequently-Used Commands, Nopassword

Frequently-Used Commands

Command	Option(s)	Description
DEFINE SERVER GATEWAY ipaddr		Specifies the host to be used as a TCP/IP
		gateway to forward packets between networks.
		Enter an IP address.
DEFINE SERVER	BOTH	Enables incoming LAT and Telnet connections.
INCOMING option
	LAT	Enables only incoming LAT connections.
	NONE	Disables incoming connections.
	TELNET	Enables only incoming Telnet connections.
	PASSWORD	Causes the ETS to prompt for a password for all
		incoming connections.
	NOPASSWORD	Allows connections to be established without
		prompting for a password.
DEFINE SERVER IPADDRESS ipaddr		Sets the ETS’ network IP address.
DEFINE SERVER LOADHOST ipaddr		Specifies the TCP/IP host from which the ETS
		requests its run-time code.
DEFINE SERVER LOGIN PASSWORD		Sets a new password that will be required
		before incoming logins are accepted. You will be
		prompted for the new password (up to 6
		alphanumeric characters, case-insensitive).
DEFINE SERVER NAME “newname”		Specifies a new name for the ETS. Names are
		restricted in length; generally a name of 11 or
		fewer characters is permissible. Enclose value
		in quotes to maintain case sensitivity.
DEFINE SERVER NETWARE		Specifies the NetWare host from which the ETS
LOADHOST server		requests its run-time code. Enter a file server
		name of up to 11 characters.
DEFINE SERVER PRIVILEGED		Sets a new password that will be required for
PASSWORD		privileged user status. You will be prompted for
		the new password (up to 6 alphanumeric
		characters, case-insensitive).
DEFINE SERVER RARP {EN/DIS}		Enables or disables querying for a RARP host at
		system boot time.
DEFINE SERVER SOFTWARE		Specifies the name or path (TCP) of the
“filename”		software download file. The filename can be up
		to 11 characters, and the pathname can be up
		to 26. The ETS will add a “.SYS” extension.
DEFINE SERVER SUBNET MASK		Specifies the subnet mask to be used for the
ipmask		ETS. The ipmask must be in n.n.n.n format.
HELP option	<nothing>	Displays a list of top-level (general) Help topics.
	<keyword>	Displays information about the keyword(s)
		entered. Multiple keywords must be specified in
		the order they occur in a command.
DEFINE SERVICE “name” PORT num		Creates a new service and associates it with the
		specified port.
DEFINE SERVICE	APPLETALK	Toggles whether the named service can be
“name” option	{EN/DIS}	used to service networks running the specified
		protocol. RTEL applies to TCP/IP networks.
	LANMAN
	{EN/DIS}
	LAT {EN/DIS}
	NETWARE
	{EN/DIS}

62 ETS Installation Guide