Lantronix ETS16PR, ETS8PS NetWare Host Troubleshooting, Use the Show Protocols NetWare Access

NetWare Configuration

3.From the main menu, choose Quick Set-Up.

4.When prompted by PCONSOLE, enter the information with which to configure the print queue.

‹The print server name (ETS_xxxxxx),

‹The new printer name (service name, such as ETS_xxxxxx),

‹The new print queue name, and

‹The print queue volume (the name of the file server from which the printer receives print requests).

‹The remaining fields can be left in their default settings.

5.Press the F10 key to save the print queue information.

6.Reboot the ETS.

NetWare Host Troubleshooting

Table 6-1. NetWare Host Troubleshooting (Bindery Mode)

Area to Check	Explanation
The print server	Use PCONSOLE to check.
names in
PCONSOLE match
the ETS name and its
service name
The ETS NetWare	Use the Show Protocols NetWare Access
access table	command. Scanning too many file servers can
	cause a delay between jobs. Configure the
	access list to only scan for jobs on the file servers
	of interest.
Table 6-2. NetWare Host Troubleshooting (NDS)
Area to Check	Explanation
The ETS NetWare	Use the Show Protocols NetWare Access
access table	command. By default, only local file servers are
	scanned for queues.
The ETS login	The passwords must match or the ETS will not
password and the	be able to log into the file servers to scan for
queue password on	jobs.
the file server
The ETS has	Type NETSTAT at the Local> prompt. This will
successfully attached	display information about fileservers, printers,
to the queue	and queues that the ETS has found. If a queue is
	in JobPoll, the ETS has successfully attached to
	the queue.

ETS Installation Guide 39