Operating the TV, Automatic Programming System

Operating the TV

You can operate your TV both using the remote control handset and onset but- tons.

A.P.S.

(Automatic Programming System)

"PLEASE, CHECK ANTENNA CABLE AUTO. PROGRAMMING SYSTEM" message will be displayed when you turn on your TV for the first time. APS, searches and sorts all chan- nels and stores them automatically on your TV, according to the transmission of pro- gramme systems in your area.

To cancel APS before starting, press “TV” button. First of all choose the “COUNTRY”. This, will effect the sort process in APS. To select “START” use “P+“ or “P-” button and

press “” or “” button. To cancel APS dur- ing running press “” or “” button.

After APS is finalized, a programme list will apper on the screen. In the programme list you will see the programme numbers and names assigned to the programmes.

If you do not accept the locations and / or the programme names of programmes, you can change them in Programme menu.

Operating with the buttons on the TV set

Volume setting and programme selection can be made using the buttons on the front panel.

Volume Setting

•Press “” button to decrease volume or

“” button to increase volume, so a vol- ume level scale (slider) will be displayed at the middle of the bottom on the screen.

•By pressing both the “ ” and “” buttons at the same time you can enter Main menu.

Programme Selecting

•Press “P/Ch +” button to select the next pro- gramme or “- P/Ch” button to select the pre- vious programme.

Entering Main Menu

•Press "MENU" button to enter Main menu. In the Main menu select sub-menu using “- P/ Ch” or “P/Ch+” button and enter the sub-

menu using “ ” or “ ” button. To learn the usage of the menus, refer to the Menu System section.

Operating with Remote Control

The remote control handset of your TV is de- signed to control all the functions of the model you selected. The functions will be described in accordance with the menu sys- tem of your TV.

Functions of the menu system are de- scribed in Menu System section.

Volume Setting

Press “ ” button to increase volume.