- 19 -
 Press an appropriate RED ( ), GREEN
(), YELLOW ( ) or BLUE ( ) button
in order to reach the relevant page quickly.
For Toptext
If Toptext transmission is present, colour
coded buttons will appear in status row.
If Toptext transmission is not present, status
row will not appear.
In Top mode the P+ or P- commands will
request the next or previous page respec-
tively. If Toptext transmission is not avail-
able, in case of operation of these com-
mands, wraparound occurs.

To exit Teletext

 Press TV button. The screen will switch to
TV mode.

To Display the Time

 While watching a TV programme with Tele-
text transmission press   button. The
current time information, captured from Tele-
text will be displayed at the upper middle of
the screen.
 If the programme being watched does not
have Teletext transmission, no iformation
will be displayed.
Connect PeripheralEquipment
There is a wide range of audio and video
equipment that can be connected to your TV.
The following connection diagrams show
you where the different equipment should be
connected at the back or the front side of the
TV.

Via the Euroconnector

Your TV set has a Euroconnector socket. If
you want to connect peripherals (e.g. video,
decoder, etc.) which have Euroconnectors,
to your TV, use SCART1 or SCART2 inputs.
If an external device is connected via Euro-
connector sockets TV is switched to AV
mode automatically. If the signal is RGB
then the RGB OSD indicator is displayed on
the screen.
In AV mode if you press the   button the
TV status OSD is displayed on the screen.

Via Ant Input

If you want to connect to your TV, peripherals
like video recorders or decoders, but the de-
vice you want to connect does not have
Euroconnector, you should connect it to the
ANT input of your TV set.
If the VCR is connected via antenna input
it is suggested to use the Programme 0.

Decoder

Cable TV offers you a wide choice of pro-
grams. Most of them are free, others are to
be paid for by the viewer. This means that
you will need to subscribe to the broadcast-
ing organisation whose programmes you
wish to receive. This organisation will supply
you a corresponding decoder unit to allow
the programmes to be unscrambled.
For further information ask your dealer. See
also the booklet supplied with your decoder.
Connect a decoder with an aerial socket
to the TV
 Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
 Connect the decoder to your TV with a
eurocable (RCA Jack Cable) to EXTERNAL.
When your decoder has a Euroconnector
you can obtain better picture quality if you
connect a eurocable to EXTERNAL .

TV and Video Recorder

 Connect the aerial cables.
Better picture quality can be obtained if you
also connect a eurocable to EXTERNAL
sockets.