Chapter 4: iGuardware

Fig.11 iGuard Web Manager

4.2.1.3 IP Configuration

This section allows you to set the IP configuration for iGuard.

Select the iGuard on the right display screen, and then click “IP Configuration”. This will bring up the IP Address Configuration window. There are two tabs;

IP Address

Advanced (for port setting configuration)

When using iGuard for the first time, it is advised to choose the “Using Static IP Address” option. For this option, the user will have to enter an IP Address, Subnet Mask and Gateway of their choice (refer to Appendix C for IP address explanation).

15

Page 16
Image 16
Micon IP-220E manual IP Configuration, IGuard Web Manager