Appendix D: Glossary
Appendix D: Q&A
Q1. I have set a permission level without first setting an "Administrator" first and now I can't change anything.
You will need to update the firmware. Download the firmware and use iGuard Utility to upload it into iGuard. Once completed, the Username and Passwords will be reset to default. Always remember to save your iGuard configuration for use later.
Q2. Can I use other USB Camera to connect to iGuard?
Yes, provided that the camera is using VIMICRO chip. You will have to check with the manufacturer of the USB camera. Currently, about 60% to 70% of the cameras produced in China uses this chip.
Q3. I get the following message, when I click on ActiveX
Click on the top margin, and install ActiveX. Also make sure that you have firmware v2.37, if not you'll need to upgrade.
Q4. How can I view images from my web enabled PDA?
Please make sure that you have a GRPS enabled PDA. Use the browser and type in http://xxx.xxx.xxx.xxx/image.cgi (where xxx is the WAN IP address or your Domain Name). You will then be directed to this page;
82
