Chapter 4: iGuardware
Chapter 4: iGuardware
iGuardware is a collection of two utility programs: iGuard Utility and iGuardview. You can use the iGuard Utility to quickly setup multiple iGuard units and you can use iGuardview to monitor multiple cameras, and maybe most importantly to perform motion tracking (V2.5 and above only). If you have a DHCP server on the network, the iGuard will obtain an IP address automatically, and you can enter this IP address in IE to launch the web manager (Chapter 5).
4.1 Installing iGuardware
Insert the software CD (or download from www.iguard.com) and click on setup if autorun does not start.
Fig.3 iGuardware Installation
"iGuard Utility - This is a program that helps the user perform quick installation. It will detect the current configuration and take the user through the necessary network setup.
a.Click the ‘iGuard Utility’ button to start installation.
b.After the step by step installation is completed, the iGuard Utility group will appear in Windows ’Start’ Â ‘Program Group’. “iGuard” Click this to start the program.
"iGuardView - This is a windows based program designed to allow user to control a large number of iGuard module located either in a LAN or on a WAN.
"Read User’s Manual - Click to read iGuard’s User Manual. You will need Adobe Acrobat Reader v5.0 or higher.
8
