Chapter 3 Connection
3.1 Determine connection settings
Before configure the router, you need to know the connection information
supplied by your ADSL service provider.
3.2 Connecting the Router to network
Unlike a simple hub or switch, the setup of the ADSL Router consists of more than simply plugging everything together. Because the Router acts as a DHCP server, you will have to set some values within the Router and also configure your networked PCs to accept the IP Addresses the Router chooses to assign to them. Generally, there are several different operating modes for your applications. Your ISP will tell you which mode is necessary for your system. The modes available are router, bridge, PPPoE+NAT and PPPoA+NAT.
3.3 The relative configuration on PC
Please follow the steps instructed below when installing your system for the first time via web console:
1)Shut down the power on everything, including your PCs and ADSL Router.
17
