Section 1: Introduction

M54E2 Quick Installation

We know that many experienced people prefer to read as little of the documentation as possible. If this sounds like you, here’s the short form:

1.Make backup copies of your installation and configuration diskettes.

2.Ground yourself to prevent damaging static discharge, then remove the M54E2 from its packaging.

3.Configure and verify the system board’s jumper settings. (See Jumper Settings in Chapter 2).

4.Install the CPU and the system memory (Chapter 3).

5.Install the motherboard into the chassis and make all necessary case connections.

6.Install any ISA, PCI and EISA add-on peripherals (Chapter 3).7.Turn the computer on and press the <F2> key when you see the screen below:

Figure 1-1: Power-Up Screen

M54E2 System Board Manual

1.3