Micronics M54E2 PCI/EISA VRE (Vcc3=3.6V), Non-ParityDRAM, Disable Super I/O, W25 IRQ14 (default), Jumper Function Settings, Jumper, Jumper, Function, Function, Settings, Function

Section 2: Configuring the M54E2

Table 2-4: Jumper settings to set the CPU voltage regulator selection.

Jumper	Function	Settings
W28	VRE (Vcc3=3.6V)	Open
	VR/STD (Vcc3=3.45V) (default)	Close

Table 2-4: CPU VRE Selection

Table 2-5: Jumper settings to set the onboard IDE IRQ.

Jumper Function SettingsW25 IRQ14 (default) 1-2

Table 2-5: Onboard IDE Controller Selection

Table 2-6: Jumper settings to select parity checking or non-parity checking DRAM.

Jumper	Function	Settings
W41	Non-Parity DRAM	Open
	Parity DRAM (default)	Close

Table 2-6: DRAM Parity Selection

Table 2-7: Jumper settings to enable or disable Super I/O.

Jumper	Function	Settings
W30	Enable Super I/O (default)	Open
	Disable Super I/O	Close

Table 2-7: Super I/O Selection

2 - 4 M54E2 System Board Manual