DS5 | User Guide |
Wireless Kit Assembly - DS5M
If your DS5M did not come with the wireless kit and you would like to install this module yourself, simply follow these instructions:
1.Lift the top cover off the body. Push it upwards with a thin and small item through the opening at the bottom.
3.Disconnect the cables, then lift the frame and the hard drive out of the plastic casing.
2.Remove the screws which are holding the aluminium frame in place.
4.Remove the screws which are used to mount the bridge board to the heat sink and lift the board out of the casing.
Page 15 / Chapter 2 - Hardware Installation
