Chapter 3

Video Off Option

This setting is used to control the mode in which the monitor will shut down.

Setting options:

 

Always On

Always turn on.

Suspend -> Off

During suspend mode, the monitor will shut down.

Susp, Stby->Off

During suspend or standby mode, the monitor will shut

All Modes ->Off

down.

The monitor is turned off during doze, standby, or sus-

 

pend mode.

Video Off Method

This determines the manner in which the monitor is blanked.

V/H SYNC+Blank

This selection will cause the system to turn off

 

the vertical and horizontal synchronization ports

Blank Screen

and write blanks to the video buffer.

This option only writes blanks to the video buffer.

DPMS Supported

Initial display power management signaling.

ModemUseIRQ

This setting names the interrupt request (IRQ) line assigned to the modem (if any) on your system. Activity of the selected IRQ always awakens the system. Setting options: 3, 4, 5, 7, 9, 10, 11, AUTO.

Hot Key FunctionAs

This setting specifies the function of the preset hot key. Setting options: Disable, Power Off, Suspend.

HDD OffAfter

When enabled and after the set time of system inactivity, the hard disk drive will be powered down while all other devices remain active. The settings are: Disable, 1~15 Min.

Power Button Override

Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off state. The settings are: Delay 4 Sec, Instant Off.

Power/Sleep LED

This item configures how the system uses power LED on the case to indicate

3-20

Page 54
Image 54
Microstar G52-MA00514 Video Off Option, Video Off Method, ModemUseIRQ, Hot Key FunctionAs, HDD OffAfter, Power/Sleep LED