Chapter 3
receiving the signal, when the operating system is ready, the system will interrupt itself and perform the service required by the I/O device.
RING Power Up Control, PCI PME Power Up Control, USB Port Wake Up Control, Hot Key Power Up Control, PS2 Mouse Power Up Control These fields specify whether the system will be awakened from power saving modes when activity or input signal of the specified hardware peripheral or component is detected.
Note: To use the function of “RING Power Up Control”, you need to install a modem supporting power on function.
KB Power On Password
This setting allows you to enter the password to authorize the keyboard to power on the system.
PowerUp byAlarm
This function is for setting date and time for your computer to boot up. During Disabled, you cannot use this function. During Enabled, choose the Month, Day, and Time Alarm:
Month Alarm You can choose which month the system will boot up. Day of Month Alarm You can choose which day of the preset month the system will boot up. Set to 0, to boot every
day.
Time (hh:mm:ss) Alarm You can choose what hour, minute and second the system will boot up.
Note: If you have change the setting, you must let the system boot up until it goes to the operating system, before this function will work.
