Microtek Artix Scan1100 manual Operating the Scanner, Positioning reflective materials, English

English

6 Operating the Scanner

This section provides information on how to operate the ArtixScan 1100. The subjects covered in this section include how to position your images for scanning and how to use the various holders included in your scanner package when scanning transparent film.

1. Positioning reflective materials

This procedure applies when you use the upper scan bed of the ArtixScan 1100. The upper scan bed is used for scanning reflective materials such as photos and prints.

A. General scanning

1.Lift the scanner lid.

2.Place the image to be scanned face down on the scanner glass. Center the top of the image at the “0” position along the horizontal ruler on the scanner. Then lower the scanner lid.

“0” mark is in the middle of the horizontal ruler

B. Scanning thick documents

To scan thick documents, lift the scanner lid high enough so that there is room to place the document on the scanner glass. Then lower the scanner lid.

18 ArtixScan 1100 Hardware User’s Guide