Microtek Artix Scan1100 manual Contents

English

	Contents
1 Introduction		1
2 General Installation		4
1.	Unpacking the Scanner	4
2.	Unlocking the Carriage	4
3.	Resetting the scanner’s SCSI ID	5
4.	Power-up test	5
	A. Operating Voltage	5
	B. Connecting the Scanner to Power Source	5
	C. Powering up the Scanner	5
	D. Observing the Scanner Boot Process	6
5.	Choosing the Scanning Station	6
	Requirements for the Operating Environment	6
3 Installation on the Macintosh		7
A. Installation for Macintosh computers with built-in SCSI ports		7
B. Installation for the new G3 Macintosh computers		8
C. Installing the software		8
4 Installation on Windows 98 / 95		10
1.	Installing the interface card	10
2.	Checking the interface card status	10
3.	Installing the software	11
4.	Connecting the scanner	11
5.	Termination	12
6.	Troubleshooting	12
5 Installation under Windows NT 4.0		16
6 Operating the Scanner		18
1.	Positioning reflective materials	18
	A. General scanning	18

B. Scanning thick documents 18