Microtek Artix Scan1100 B. The Calibration Window Preview and Scan, creating the profile, English

B. The Calibration Window: Preview and Scan	C. The Calibration Window: Aligning targets and
	creating the profile

English

1.Preview: The Preview button performs a preliminary scan of the target, displaying the entire target image in the calibration window.

2.Scan: The Scan button scans the target image and prepares the scanner for the important succeeding steps of aligning the registration marks and creation of the profile.

1.Calibrate: This button starts the actual calibration process in which a custom scanner ICC profile is created for the scanner. This button is grayed out until you have performed the required alignment of the three registration marks on the target.

2.Previous Mark: This button lets you go back one step to align the previous registration mark.

3.Next Mark: This button lets you go forward one step to align the next registration mark.

4.Go to Step 1: This button takes you back to the preview image screen so that you can rescan the target image and restart the calibration process.

5.Show Patches: This option lets you check the sampling area of all the color patches. When aligned properly, the sampling area appears as a green square in the center of most patches. If any areas fall outside a patch, realign the registration marks by clicking the “Previous Mark” and “Next Mark” buttons, and then reselecting the registration marks until the sampling areas are centered.

6.Close: This button lets you return to the main screen.

ArtixScan 1100 Hardware User’s Guide 35