Setting the serving size
The amount of water used for each serving of espresso, coffee or hot water can be set to suit your taste and cup size.
For drinks prepared with milk, you can also set the duration of the steam used for heating or frothing the milk.
There is a maximum amount of water that can be programmed for each type of drink. The water flow will stop automatically when the maximum amount of water has been reached.
To program the serving size you can either:
–use the , , or buttons, or
–select program the amount from the settings menu.
If there is not enough water in the water tank, the process will be stopped and the programmed amount will not be saved.
Programming using the , , or buttons
Setting the portion sizes for espresso, coffee and hot water
^Place a cup under the coffee dispensers.
^Press and hold the , or buttons until PROG. THE AMOUNT appears in the display.
The selected drink will be prepared and SAVE will appear in the display.
^Press the OK button when the cup has been filled to the desired level.
The serving size set will now be dispensed every time the selected drink is prepared.
TIP Programming can be canceled as long as CANCEL appears in the display.
31
