Cleaning and care
^Clean all the parts with a mild solution of warm water and liquid dish soap. If necessary a small soft brush can be used to remove stubborn soiling.
^Rinse all parts carefully and completely with water.
^Dry parts with a soft cloth.
Reassemble the cappuccinatore in the reverse order:
^First replace the locking disc, followed by the dial on the cappuccinatore.
^Then replace the milk tube and nozzles.
^Fit the cappuccinatore on to the steam and water spout from below.
Milk flask
The milk flask should be taken apart and cleaned daily.
The milk flask is not dishwasher safe, wash by hand.
^Pull the milk tube from the cappuccinatore. Disconnect the other end of the milk tube/stainless steel angle from the lid.
^Unscrew the lid and remove the stainless steel intake pipe on the lid.
^Wash all parts with a mild solution of warm water and liquid dish soap. If necessary use a small brush to remove stubborn milk residue.
^Rinse all parts with water.
^Thoroughly dry all parts.
^Put the milk container back together.
Water tank
The water should be changed everyday to prevent the
Be sure that the valve, bottom of the water tank and the area under the water tank are clean and free of obstructions. Otherwise the water tank will not sit correctly.
^Wash the water container in the dishwasher, or by hand using a mild solution of warm water and liquid dish soap.
^Dry with a soft cloth.
^Clean the water tank niche, in particular the slots.
48
