Miele CM 5100 manual Water container, Drip tray cover, Cleaning and care

Cleaning and care

^Clean all parts with a solution of hot water and washing-up liquid. If neccessary, a small brush can be used to remove any stubborn milk deposits.

^Rinse all parts carefully under running water.

^Then dry them carefully.

Reassemble the cappuccinatore in the reverse order:

^First replace the locking disc followed by the dial on the cappuccinatore.

^Then replace the milk tube and nozzles.

^Fit the cappuccinatore on to the steam and water spout from below.

Water container

Change the water every day to prevent a build-up of bacteria.

Make sure that the valve, the underside of the water container and the surface the water container sits on are clean. Otherwise the water container will not sit correctly.

^The water container can be cleaned in the dishwasher or by hand using hot water and a little washing-up liquid.

^After cleaning, dry the water container.

^Clean the surface the water container sits on, particularly the slots, carefully.

Drip tray cover

^Remove the drip tray cover from the drip tray.

^The drip tray cover can be cleaned in the dishwasher or by hand using hot water and a little washing-up liquid.

^Dry the drip tray thoroughly.

^Replace the cover onto the drip tray. Make sure that the outer hole is located underneath the cappuccinatore.

49