Problem solving guide
Messages in the display
Message | Possible cause and remedy |
|
|
FAULT - 1 | The coffee machine has overheated. |
| |
FAULT - 2 | ^ Switch the machine off with the On/Off button. Wait for |
FAULT - 82 | one hour and then switch it back on again. |
| If the fault message appears in the display again, |
| ^ Call the Service Department. |
|
|
FAULT - 28 | There is too much ready ground coffee in the ground |
| coffee chute. |
| If more than one level scoop of ground coffee is added to |
| the coffee chute, the brew unit cannot process the coffee. |
| The ground coffee will be directed into the waste container |
| and a fault message will appear in the display. |
| ^ Switch the machine off with the On/Off button . Wait for |
| two minutes and then switch it back on again. |
|
|
FAULT - 73 | The brew unit cannot be positioned correctly. |
| ^ Switch the machine off with the On/Off button . |
| ^ Press the and buttons at the same time. Then press |
| the OK button twice. |
| This will initialise the brew unit motor and the brew unit will |
| move into its starting position. |
| If the fault message appears in the display again, |
| ^ call the Service Department. |
|
|
58