Problem solving guide
Unusual performance of the coffee machine
Problem | Possible cause and remedy | |
|
| |
Only very little | The filters in the brew unit are blocked. | |
coffee or nothing at | ^ Clean the brew unit (see "Cleaning the brew unit") | |
all is dispensed from |
| |
the coffee spouts, | ^ Degrease the brew unit (see "Cleaning the brew unit") | |
although a drink has |
| |
been selected. |
| |
Water stopped | The maximum amount possible was reached. Preparation | |
flowing whilst | is halted and the maximum portion size possible will be | |
programming the | saved. | |
amount to use. | or | |
| ||
| There is insufficient water in the water container. The | |
| programming the amount process will be cancelled and | |
| the portion sizes will not be saved. | |
| ^ Fill the water container with fresh tap water and replace it | |
| in the machine. | |
| ^ Repeat the procedure for programming the amount. | |
|
| |
The machine does | This is not a fault. | |
not rinse through | If the coffee machine still has an operating temperature | |
when switched on, | ||
higher than 60 °C , then rinsing will not take place. | ||
even though the | ||
| ||
Automatic rinsing |
| |
function is switched |
| |
on. |
| |
There is a lot of | The coffee is too coarsely ground. | |
residual "coffee | ^ Set the grinder on a finer setting (see "Grinder setting"). | |
water" in the waste | ||
container. | ^ If necessary, adjust the amount of coffee (see "Amount of | |
| coffee"). | |
|
|
64