| Problem solving guide | |
|
| |
|
| |
Message | Possible cause and remedy | |
|
| |
The following | The drip tray is not sitting correctly. | |
appears in the | ^ Push the drip tray into the coffee machine until it clicks | |
display, even | ||
into position. | ||
though the drip tray | ||
| ||
is empty: | or | |
EMPTY THE | The metal contact discs are dirty. | |
DRIP TRAY | ||
^ Clean the discs and then dry them thoroughly. | ||
| ||
| or | |
| ^ The drip tray sensing mechanism is not working. | |
| ^ Switch the coffee machine off and then back on again | |
| using the master switch. | |
| If the fault message appears in the display again, | |
| ^ Call the Service Department. | |
|
| |
You can hear the | The coffee machine is attempting to draw in water although | |
noise of the pump | the water container is empty. Air is present in the pipework. | |
and the following | ^ Fill the water container with cold tap water. | |
appears in the | ||
| ||
display: | SYSTEM FILLING UP - START will appear in the display. | |
FILL WATER | ^ Then press the OK button. | |
CONTAINER AND | ||
| ||
PLACE IN THE |
| |
MACHINE |
| |
|
| |
Dispensing stops | There is not enough water in the water container. | |
and the following | ^ Fill the water container with fresh tap water and replace it | |
appears in the | ||
in the machine. | ||
display: | ||
^ Then press the OK button. | ||
PROCESS STOPPED | ||
WATER CONT. EMPTY | The following message appears in the display: CONTINUE | |
| DISPENSING - YESB. | |
| ^ Press the OK button to continue dispensing, | |
| or select NO to cancel preparation. | |
|
|
59